The concrete pump electric is composed of pump body and conveying pipe. It is a machine that uses pressure to continuously transport concrete along the pipeline. It is mainly used in housing construction, bridge and tunnel construction.
At present, it is mainly divided into gate valve concrete pump and S valve concrete pump. The other is to install the pump body on the chassis of the car, and then equip it with booms to get a pump truck.
The pumping capacity of the electric concrete pump mainly depends on the motor power, which is usually constant power, like 30 kW, 45 kW, 55 kW and so on. Excessive power may result in high cost or inconvenience, while too low power may not meet engineering requirements, so it is very important to select the appropriate power.
The selection of the power of the concrete pump electric mainly depends on the transformer capacity, the distance from the concrete pump and the size of the wire diameter. Pay attention to select the appropriate power according to the construction requirements, so as to avoid waste or failure of construction.
In order to ensure that the concrete pump has a large conveying capacity, and a certain outlet pressure and matching economic power, most adopts the constant-power plunger pumps. The power is generally in kilowatts, and the common ones are 30 kilowatts, 45 kilowatts, 55 kilowatts, 60 kilowatts, 75 kilowatts, 90 kilowatts, 110 kilowatts, 132 kilowatts and so on.
The motor power of a concrete pump p is the precondition for determining the outlet pressure and the delivery volume. Under the condition of a certain motor power, the increase of the pressure will definitely reduce the delivery volume; on the contrary, reducing the outlet pressure will increase the delivery volume.
Haomei Machinery uses the function design of switching between high and low pressure to meet different construction requirements when it designs electric motor pump. It can also generate higher outlet pressure with the same motor power. Welcome to leave message below to inquire it.